How to set up Cerabed-Rh for various Modes

1- Automatic Mode:

This mode has been pre-programmed to provide approximately 40 minutes of complete massage and CERAGEM Pressure™ with Moxibustion effect to the spine and abdominal area.

- First users must lie down, face up. The space between the top of the users' heads and the top of the bed is about one hand.

- Turn on the Thermal Massager Bed by push the Red button on the Remode Control (On/Off Switch).

- Push the Grey button to set the red light to Auto.

- Then push the Start button (Green)  to begin the treatment.

 

The rollers in the bed start to run under your spine for 30 minutes then 2 beeps will be sounded to let users known that they must turn their body face down to let the massager bed works on the digestive system for 10 minutes. The session will terminate by sounding 5 beeps.

 

2. Semi-Automatic Mode:

Users can set the program to localize the application of massage and CERAGEM Pressure™ with Moxibustion effect to your desired area.

- First users must lie down, face up. The space between the top of the users' heads and the top of the bed is about one hand.

- Turn on the Thermal Massager Bed by push the Red button on the Remode Control (On/Off Switch).

- Push the Grey button to set the red light to Semi-Auto.

- Then push the Start button (Green)  to begin the treatment.

 

The rollers in the bed start to run under your spine then:

- Push the Up button (˄) to set up upper treatment area.

- Push the Down button (˅) to set up the lower treatment area.

 

3. Massage Only Mode
This mode provides a continous massage with the optimal level of Radiant Far-Infrared Heat.

- First users must lie down, face up. The space between the top of the users' heads and the top of the bed is about one hand.

- Turn on the Thermal Massager Bed by push the Red button on the Remode Control (On/Off Switch).

- Push the Massage button (Grey) to turn ON the massage function.

- Then push the Start button (Green)  to begin the treatment.

 

4. Manual Mode
Users can manually maneuver the Internal Projector to apply massage, CERAGEM Pressure™ and Radiant Far-Infrared Heat to a specific area.

- First users must lie down, face up. The space between the top of the users' heads and the top of the bed is about one hand.

- Turn on the Thermal Massager Bed by push the Red button on the Remode Control (On/Off Switch).

- Push and hold the Up button (˄) to move the rollers up.

- Push and hold the Down button (˅) to move the rollers down.

 

5. Extra treatments: The bed has special functions such as treatment of hemorrhoids and treatment of urinating disorders:

Put the 3 light projector to the hold of Lower Mat then sit at the end of the Bed facing away from bed with:

                                                *  the anus touching the projector for hemorrhoids,

                                                *  the vagina touching the projector for treament of urinating disorders.